Fokker D-8 Bill of Materials
In Addition to Bob Holman's Short Kit
Fuselage
pieces material size length notes
1 12 hard balsa 3/16" sq. 36 longerons, uprights, cross members
2 6 hard balsa 1/8" sq. 36 stringers
3 1 balsa 1/8 sheet 36 reinforcements
4 1 balsa 3/16 sheet 36 hatches and reinforcements
5 1 balsa 1/16 sheet 36 cockpit
6 3 pine or bass 1/4" sq. 12 wing mounts, servo rails
7 2 music wire 3/32" 36 landing gear
8 1 alum or brass 1/8" O.D. 12 Tubing for plug-in landing gear
9 2 music wire 1/16" 36 cabane, tail skid
10 1 alum or brass 3/32" O.D. 12 Tubing for plug-in cabane
11 2 ply, balsa 4-1/4" Dia custom laminated wheels
12 3 choice control pushrods or pull-pulls
13 1 glass or alum 5-1/2" Dia 3 cowling
14 3 spruce 1/8x 1/4" 36 struts
15 1 power plant, engine mount, motor, fuel tank, prop, etc.
16 1 choice 1 sq. yard covering material
17 1 choice radio outfit
Empennage
pieces material size length notes
18 4 med balsa 1/4" sq. 36 stab, elevator, fin, rudder
19 3 med balsa 1/16x1/4" 36 ribs
20 1 light balsa 1/4x3/4" 36 trailing edge material
21 6 choice hinge material
22 1 choice 1/2 sq. yard covering material
Wing
pieces material size length notes
23 2 light balsa 1/4x3/4" 36 trailing edge material
24 2 med balsa 1/4" sq. 36 leading edges
25 8 hard balsa 1/8x1/4" 36 wing spars
26 2 hard balsa 1/8" sq. 36 wing spar
27 1 hard balsa 1/16 sheet 36 shear webs
28 1 choice 1.5 sq. yard covering material
Winglet
pieces material size length notes
29 1 balsa 1/16 sheet 36 cut new flat bottom ribs
30 1 hard balsa 1/8" sq. 36 wing spars
31 1 hard balsa 1/4x1/2" 12 leading edge
32 1 light balsa 1/8x1/2" 12 trailing edge
Miscellaneous
33 Adhesives, sand papers, copper wire, solder, washers, dopes, paints, etc.

Click to Return to SAM 27 Home Page     Click to Return to Fokker D-VIII Builing Tips