by Tandy Walker, Arlington, Texas
Here are a couple of shots showing how I integrate the curved stab tip spline with the straight 1/4" square diamond leading edge. The spline is cut off on the bias and the 1/4" square diamond leading edge is notched out along its diagonal as shown below. Notice the 1/8" block use to elevate the LE of the spline to align it with the leading edge center line.
|
|
This picture shows the 1/4" square diamond LE fitted to the spline, but not yet glued in place......Tandy
|
|
 |
The picture below shows the progress I made yesterday afternoon on laying up the big Bomber's stab. The center section is still open as I have build in the stab attach points............................Tandy
|
Click
to return to SAM 27 Home Page 
Click here to go to the next page
Re-Use by Modeling-related Web sites Authorized so long as credit to Society of Antique Modelers, SAM 27 appears on page where used. All other rights reserved, including publication. Society of Antique Modelers Chapters (SAM) may re-use images and text from this site so long as credit is published with the image or text and image used: "Used by permission of the Society of Antique Modelers, SAM 27". Members of the Academy of Model Aeronautics chapters (AMA) are granted similiar reprint rights. All other organizations may EMAIL the webmaster for permission to reuse material contained or used on this site.
